Model 10-3061: 10" Deluxe Bandsaw

Model 10-3061: 10″ Deluxe Bandsaw

The new and improved 10” Bandsaw 10-3061 is a replacement of our previous 10-306 model. Numerous features make this bandsaw extremely easy to operate and make adjustments to the blade, guides and fence. The increased cutting capacity, 2 blade speeds, and increased 1/2HP motor are quite ample enough for smaller projects, and will be appreciated by

» Read More

woodworkers having limited shop space for a larger size bandsaw. Improved features for easy operation – 2 blade speeds, tool-less blade guides, quick-release blade tension lever, tilting 0-45° cast iron table, adjustable rip fence, larger blade tension knob, dust port for shop vacuum hookup, side windows for viewing blade tracking settings, storage hanger for the fence and tools, and safety paddle on/off switch. Reduced size is ideal for transporting, or storing, when not in use. Includes rip fence. Steel stand is available separately.

This redesigned model includes a new 2-1/2” Dust Port which has been moved up from the base and is also now tilted upward 10°, so dust fittings will attach to it easier. The Door Hinges have been redesigned to make them sturdier to avoid breakage. Fence Carrier now has 4 additional plastic inserts in case fence tilt adjustments are needed. Rip Fence is supplied with a plastic pad on its end to allow the fence to slide easier. Lower bandsaw frame construction has been improved for positioning of the Lower Connecting Plate and Guide Assembly. Screws in the lower connecting plate have been changed for easier access with hex wrenches, if plate adjustment is needed. Upper bandsaw frame and guide assembly has been tweaked to ensure a consistent 5” maximum cutting height can be achieved.

» Read Less

NEW Redesign Features:

Easy Fitting Dust Port
Sturdy Door Hinges
Adjustable Fence Carrier
Easy Sliding Rip Fence System
Easy cutting adjustments

Standard Features:

Patented Spring Loaded Tool-less Guide System
Quick-Release Blade Tension Lever
2 Blade Speeds 1,515 or 3,250 ft. / min
Powerful 1/2 HP Motor
Cutting Height of 5” with 9-5/8” Width

WHERE TO BUY

SKU: 10-3061 Category: Bandsaws

Tech Specs

Motor

Horsepower	1/2 HP
Amps	5.5
Volts	115V, 60Hz
Speed	1,720 RPM

Cutting Capacity

Height	5”
Width	9-5/8”

Blade (Includes 5/16“ x 6TPI, Regular)

Width	1/8” – 1/2”
Length	70-1/2”
2 Blade Speeds	1,515/ 3,280 ft/min

Table

Size	13-3/4” x 12-1/2”
Left Tilt	5°
Right Tilt	45°
Miter Gauge Slot	5/8” x 1/4”
Height to Floor (with 13-913 stand)	39-7/8”
Height to Base	14-1/2”
Fence Size	12-1/4” x 2-3/8”

Overall

Height	34-1/4”
Width	21”
Depth	16-1/4”
Base Size	15-7/8” x 9-3/8”
Dust Port	2-1/2” O.D., 2-5/16” I.D.
Net Weight	77.5 lbs.
Shipping Weight	86 lbs.
Shipping Carton	35-1/2” x 12-3/4” x 18-1/4”
Warranty	5 Years

Features

NEW Redesign Features Include:

Easy Fitting Dust Port
Sturdy Door Hinges
Adjustable Fence Carrier
Easy Sliding Rip Fence System
Improved Frame
Easy access screws

Standard Features:

Patented Spring-Loaded Tool-less Guide System
Quick-Release Blade Tension Lever
2 Blade Speeds 1,515 or 3,250 ft. / min
More Powerful 1/2 HP Motor
Convenient 45° Table Tilting Stop
Increased Cutting Height of 5” with 9-5/8” Width

Accessories

12-201	LED Gooseneck Worklight with Magnetic Base and Magnetic Clip
13-913	Optional 10” Bandsaw Stand. Top: 14-1/2” x 9-3/4”, Base: 25” x 18-3/4”, Height: 25”
13-920	Miter Gauge Aluminum body with 60° scale for left and right settings
C10-109	Replacement Guide Bearings Pack of 6
C10-393	Replacement Table Inserts Pack of 4
C10-394	Zero Clearance Inserts Pack of 4
C10-405	10″ Rubber Wheel Tire
C10-990	Drive Belt
19-7006	Bandsaw Blade 70-1/2″ in length and 1/8″ wide with .025 Gauge. There are 8 teeth per inch in a regular tooth configuration.
19-7007	Bandsaw Blade 70-1/2″ in length and 1/8″ wide with .018 Gauge. There are 14 teeth per inch in a hook tooth configuration.
19-7002	Bandsaw Blade 70-1/2″ in length and 3/16″ wide with .025 Gauge. There are 10 teeth per inch in a regular tooth configuration.
19-7003	Bandsaw Blade 70-1/2″ in length and 1/4″ wide with .025 Gauge. There are 6 teeth per inch in a regular tooth configuration.
19-7004	Bandsaw Blade 70-1/2″ in length and 3/8″ wide with .025 Gauge. There are 4 teeth per inch in a skip tooth configuration.
19-7005	Bandsaw Blade 70-1/2″ in length and 1/2″ wide with .025 Gauge. There are 3 teeth per inch in a hook tooth configuration.

Manuals

Download the English Manual
Download the Spanish Manual
Download the French Manual

Sell Sheets

Download the Sell Sheet

Compare



Product Info	Model 10-305: 10" Bandsaw	Model 10-306: 10" Deluxe Bandsaw	Model 10-3061: 10" Deluxe Bandsaw
Sku	10-305	10-306	10-3061
Motor Horsepower	1/3 HP	1/2 HP	1/2 HP
Motor Amps	3.5	5.5	5.5
Motor Volts	115V, 60Hz	115V, 60Hz	115V, 60Hz
Blade Speed	2,780 ft/min	(2) 1,515/ 3,280 ft/min	(2) 1,515/ 3,280 ft/min
Cutting Capacity Height	4-5/8”	5”	5”
Cutting Capacity Width	9-5/8”	9-5/8”	9-5/8”
Blade Width	1/8” – 1/2”	1/8” – 1/2”	1/8” – 1/2”
Blade Length	70-1/2”	70-1/2”	70-1/2”
Quick Release Blade Tension Lever	No	Yes	Yes
Table Size	13-3/4” x 12-1/2”	13-3/4” x 12-1/2”	13-3/4” x 12-1/2”
Table Left Tilt	0°	5°	5°
Table Right Tilt	45°	45°	45°
Table Miter Gauge	5/8” x 1/4”	5/8” x 1/4”	5/8” x 1/4”
Table Height to Floor	39-7/8”	39-7/8”	39-7/8”
Table Height to Base	14-1/2”	14-1/2”	14-1/2”
Table Fence Size	13-1/2” x 1” x 2”	12-1/4” x 2-3/8”	12-1/4” x 2-3/8”
Blade Guide Type	Standard	Tool-less	Tool-less
Table Trunnion	Cast Aluminum	Cast Aluminum	Cast Aluminum
Overall Height	33-1/4”	34-1/4”	34-1/4”
Overall Width	21”	21”	21”
Overall Depth	15-1/4”	16-1/4”	16-1/4”
Overall Base Size	15-7/8” x 9-3/8”	15-7/8” x 9-3/8”	15-7/8” x 9-3/8”
Dust Port	2-1/2” O.D., 2-1/4” I.D.	2-1/2” O.D., 2-1/4” I.D.	2-1/2” O.D., 2-5/16” I.D.
Overall Net Weight	68 lbs.	77.5 lbs.	77.5 lbs.
Warranty	5 Years	5 Years	5 Years

Model 10-3061: 10″ Deluxe Bandsaw

Tech Specs

Features

Accessories

Manuals

Sell Sheets

Compare

Model 10-305: 10" Bandsaw

Model 10-306: 10" Deluxe Bandsaw

Model 10-3061: 10" Deluxe Bandsaw

Related products

Model 10-385: 24″ Bandsaw

Model 10-324TG: 14″ Bandsaw

Model 10-342: 18″ Deluxe Bandsaw

Model 10-353: 14″ Professional Bandsaw